Subject: DowVision Client/Server Tools From: rexb@eng.dowjones.com (Rex Ballard) Date: Wed, 20 Jul 94 09:37:19 EDT
How the Web Was Won
Subject: DowVision Client/Server Tools
From: rexb@eng.dowjones.com (Rex Ballard)
Date: Wed, 20 Jul 94 09:37:19 EDT
Content-Type: X-sun-attachment
----------
X-Sun-Data-Type: text
X-Sun-Data-Description: text
X-Sun-Data-Name: text
X-Sun-Content-Lines: 1
Attached is the parameters for the sun X.25 driver (sunlink)
----------
X-Sun-Data-Type: default-app
X-Sun-Data-Description: default
X-Sun-Data-Name: x25params
X-Sun-Content-Lines: 159
# DON'T CHANGE THE ORDER OF THE PARAMETERS
# THERE MUST BE A VALUE ASSOCIATED WITH EACH PARAMETER
# THERE MUST BE AT LEAST ONE SPACE BETWEEN THE PARAMETER'S VALUE AND THE '#'
#
# To change a specific parameter, first look for the the parameter
# name in the comments (starting with '#'), then modify the value at the
# beginning of the line.
#
0 #int linkid; A non-negative integer less than the
# total number of links. There should
# always be alink 0, as this is used as
# the default link.
#
1 #int on; 0 or 1. 0 will cause the link to be
# deactivated, and 1 will cause it to
# be activated.
#
#HDLC Level: HDLC_PARAM
3000 #ushort hp_t1; T1 - retransmission timer (msec)
300 #ushort hp_t2; T2 - max delay before ACK (msec)
10000 #ushort hp_t3; T3 - max idle link time (msec)
500 #ushort hp_tick; resolution of timer (tick)
135 #ushort hp_n1; N1 - max frame size - bytes
3 #u_char hp_n2; N2 - max retries of T1
0 #u_char hp_xcntl;extended control - mod 128
2 #u_char hp_k; K - window size
3 #u_char hp_addr; address - 3 for DTE, 1 for DCE
# when connecting two SunLink X.25 stations together
# without a PDN, you must specify one station to be
# DTE (i.e. 3) and the other one to be DCE (i.e. 1)
#
#
#Packet Level: L3_PARAM 3999-00120423
3999-00210124 #host_address; includes DNIC (Data Network Identification
# Code), NTN (Network Terminal Number), and
# subaddress (if it is part of host address).
# This host address is up to 14 digits long.
# The DNIC, NTN, and subaddress must be separated
# with hyphens. The subaddress is optional - if
# specified, it is used as the default subaddress
# wherever applicable. The full address of the
# terminal (DNIC and NTN) must always be specified.
# The portion of it that gets sent as the calling
# address in a call request can be controlled by
# the setting of the src_opt parameter (see below).
# If src_opt is set to 2 (meaning send only subaddress
# for the calling address), and a subaddress is not
# specified here, a null address will be sent.
# When connecting to Transpac, 'null' may be sent
# in this way.
#
8 #u_char packet_sequence;
# modulo sequence of level 3. suggested= 8
# 8, 128 ( in decimal )
#
2 #u_char default_wndsize;
# default window size for all virtual circuits
# suggested= 2
# 1 ~ 7 if packet_sequence= 8
# 1 ~ 127 if packet_sequence= 128
# ( in decimal )
#
10 #u_char default_thruput;
# default throughput for all virtual circuits
# suggested= 10 ( 9600 bps )
# 3= 75 8= 2400
# 4= 150 9= 4800
# 5= 300 10= 9600
# 6= 600 11= 19200
# 7= 1200 12= 48000
# ( bps in decimal )
#
128 #ushort default_pktsize;
# default packet size
# suggested value= 128
# 16, 32, 64, 128, 256, 512, or 1024
#
1 #ushort lic; lowest one-way incoming lcn. suggested= 512
1 #ushort hic; highest one-way incoming lcn. suggested= 512
1 #ushort ltc; lowest two-way lcn. suggested= 512
30 #ushort htc; highest two-way lcn. suggested= 575
30 #ushort loc; lowest one-way outgoing lcn. suggested= 575
30 #ushort hoc; highest one-way outgoing lcn. suggested= 575
# 4095 >= hoc >= loc >= htc >= ltc >= hic >= lic >= 1
# ( in decimal )
#
180 #u_char t0; timeout limit after sending RESET REQUEST
# packet. suggested= 180 ( seconds )
#
200 #u_char t1; timeout limit after sending CALL REQUEST
# packet. suggested= 200 ( seconds )
#
180 #u_char t2; timeout limit after sending RESTART REQUEST
# packet. suggested= 180 ( seconds )
#
180 #u_char t3; timeout limit after sending CLEAR REQUEST
# packet. suggested= 180 ( seconds )
#
# 1 ~ 255 ( seconds in decimal ) for above four fields
#
3 #u_char t0_retries;
1 #u_char t1_retries;
# must be 1 to conform to CCITT X.25
3 #u_char t2_retries;
3 #u_char t3_retries;
# number of retries before reporting error status
# to X.25 MGMT socket.
# 1 ~ 255 ( attemps in decimal ) for above four fields
#
2048 #u_short sendspace;
20480 #u_short recvspace;
0 #u_char D_bit;
# This applies only to calls that are
# originated. For incoming calls, D bit
# is always accepted.
0 #u_char non_standard_diag_code;
# This permits the setting of non-standard
# diagnostic code in clear indication and clear
# confirmation packets.
# 0= standard diagnostic code
# 1= non-standard diagnostic codes
# suggested value= 0
#
0 #int dst_opt;
# This parameter can have one of two values:
# 0 or 1. This parameter is relevant only
# for local calls. If 0, the called address
# field in the call request will be set to the
# full address of the destination (DNIC+NTN+
# subaddress). If set to 1, only the NTN and
# subaddress will be sent.
#
0 #int src_opt;
# This parameter can be 0, 1, or 2, and is
# applicable to all calls (local or long
# distance). If set to 0, the calling address
# field in the call request will be set to the
# full address of the source (DNIC+NTN+
# subaddress). If set to 1, only the NTN and
# subaddress will be sent. If set to 2, only
# the subaddress will be sent.
#
0 #int zero_opt;
# This parameter can be 0, 1, or 2. If set
# to 0, the calling and called address fields
# in the call request will be determined by
# the setting of dst_opt and src_opt. If set
# to 1, a zero will be prepended to the
# called address for long distance calls -
# 0 will be prepended to aclling address also
# if src_opt = 0. If this parameter is set to
# 2, it will behave as when it is set to 1,
# except that 0 will be prepended for local
# calls as well if dst_opt and src_opt
# indicate that full address are to be used.
#
#Physical Level:
9600 # baud rate( bps ) of physical line( from either modem or
# internal clocks ).
From jvncnet!marketplace.com!owner-online-news Fri Jul 22 13:06:23 1994
Return-Path:
Received: from eng.dowjones.com (dowjone) by dowv.eng.dowjones.com (4.1/SMI-4.1)
id AA00435; Fri, 22 Jul 94 13:06:23 EDT
Received: from jvncnet.UUCP by eng.dowjones.com (4.1/SMI-4.1)
id AA23519; Fri, 22 Jul 94 12:52:59 EDT
Received: from marketplace.com by tigger.jvnc.net with SMTP id AA25678
(5.65c/IDA-1.4.4 for dowjone!rexb); Thu, 21 Jul 1994 17:00:32 -0400
Received: from localhost (daemon@localhost) by marketplace.com (8.6.5/8.6.5) id NAA01407 for online-news-outgoing; Thu, 21 Jul 1994 13:15:15 -0600
Received: from houston.chron.com (houston.chron.com [130.80.26.2]) by marketplace.com (8.6.5/8.6.5) with SMTP id NAA01401 for ; Thu, 21 Jul 1994 13:15:11 -0600
Received: from relay.chron.com by houston.chron.com with SMTP id AA19495
(5.65c/IDA-1.4.4 for ); Thu, 21 Jul 1994 14:12:16 -0500
Received: from magic706.chron.com by relay.chron.com (4.1/SMI-4.1)
id AA04207; Thu, 21 Jul 94 14:12:15 CDT
Received: by magic706.chron.com (4.1/SMI-4.1)
id AA03057; Thu, 21 Jul 94 14:13:00 CDT